Travis

A lot of modern AV amplifiers and receivers provide the option of automatic system calibration via microphone. Calibration is advisable as the levels and distances of all the loudspeakers are deter...

The optimum positioning of the speakers depends on their use: On-Top Speakers for Dolby Atmos:One AEH 400-ATM is placed on top of each of the existing front speakers (Fig. 2). If this positioning i...

The loudspeakers offer several options for wall mounting. Wall-mounting brackets are fitted on the rear.Alternatively, the speakers can be mounted using a VESA standard wall bracket. Distance betwe...

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent impairment of sound quality, we recommend cables with cross-sections of at least 2.5 mm² for lengths u...

Dolby Atmos is a new audio standard for cinemas and home cinemas. Atmos brings a third dimension into the soundscape for the first time in the form of treble channels. These treble channels are emi...

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent impairment of sound quality, we recommend cables with cross-sections of at least 2.5 mm² for lengths u...

In the ideal configuration the speakers and the listening position should form an equilateral triangle. When the left and right speakers are the same distance from the listening position their soun...

The front loudspeakers are positioned at ear height on the left and right as equidistant from the television as possible. The rear loudspeakers are placed at ear height or a little above on the lef...

If possible, the cross-over frequency for the front and rear channels should be adjusted to approximately 80 Hz in the AV receiver‘s set-up.